Table of Contents
Advertisement
Appendix C: Software Installation
5 Press Enter when both disks for the new array are selected. The Array
Properties menu displays (as the screen shown below).
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to
the array.
*Caution: Once the array is created and its properties are assigned, you
cannot change the array properties using the ACU. You will need to
use
the Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's User's
Guide in the enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an
array type and press Enter.
Note: only the available array types: RAID 0, and RAID1, are displayed on
the screen. (*RAID 0 or RAID 1 requires two drives.)
C-7
Advertisement
Table of Contents
