Alarm Reset
The system will notify you in the
event of a power supply failure.
This feature assumes that Super-
micro redundant power supply
units are installed in the chassis.
If you only have a single power
supply installed, you should dis-
able this (the default setting) with
(CN1) to prevent false alarms.
See the table on the right for
jumper settings.
Force-Power-On Enable/
Disable
Jumper JPF,
allows you to enable
or disable the function of Force-
Power-On.
If enabled, the power
will always stay on automatically.
If this function disabled, the user
needs to press the power button to
power on the system.
Force PWR On
Audio Enable
2-21
Chapter 2: Installation
Alarm Reset Jumper
Settings
Jumper
Position
Definition
Open
Enabled
Closed
Disabled
Force Power On
(JPF)
Jumper
Position
Definition
Off
Normal
On
Force On