Table of Contents
Advertisement
Appendix C: Software Installation
You can choose from the following
options:
1. Format Disk—Simulates a low-level format of the hard drive by writing
zeros to the entire disk. Serial ATA drives are low-level formatted at the
factory and do not need to be low-level formatted again.
(*Caution: Formatting destroys all data on the drive. Be sure to back up
your data before performing this operation.)
2. Verify Disk Media—Scans the media of a disk drive for defects.
To Exit Adaptec RAID Configuration Utility
1. Once you have completed RAID array configurations, press ESC to exit.
The following screen will appear.
2. Press Yes to exit the Utility.
(*For more information regarding Adaptec RAID Utility, please refer
to Adaptec's User's Guide in the CD included in your shipping pack-
age. You can also download a copy of Adaptec User's Guide from
our web site at: www. supermicro.com.)
C-17
Advertisement
Table of Contents
