Motherboard Features - Supermicro X6DA8-G User Manual

Supermicro x6da8-g motherboards: user guide
Hide thumbs Also See for X6DA8-G:
Table of Contents

Advertisement

X6DA8-G/X6DAE-G/X6DA8-G2/X6DAE-G2 User's Manual

Motherboard Features

CPU
• Single or dual Intel
MHz front side (system) bus speed.
speed is set by Manufacturer. Please refer to the support section of our web site for a complete
listing of supported processors (http://www.supermicro.com/TechSupport.htm.)
M e m o r y
• Eight 240-pin DIMM sockets supporting up to 16 GB Registered ECC
DDR2-400 (PC3200) SDRAM (*X6DA8-G2/X6DAE-G2 only)
• Eight 184-pin DIMM sockets supporting up to 32 GB Registered ECC
DDR-333/266 (PC2700/PC2100)SDRAM(-16 GB for PC2700, 32GB for
PC2100) (*X6DA8-G/X6DAE-G only)
Notes: 1. Memory size is set via BIOS. 2. Interleaved memory; requires memory modules to be
installed in pairs. See Section 2-3 for details.
Chipset
• Intel E7525 (Tumwater) chipset
Expansion Slots
• One PCI-e slot (*x16@4GB/sec)
• One PCI-e slot (*x4@2GB/sec)
Three 64-bit PCI-X slots (*One 64-bit PCI-X-133 slot, one PCI-X-100
slot, One PCI-X-100MHz ZCR)
• One 32-bit 33MHz PCI slot (w/PCI Graphic Card support)
BIOS
• 8 Mb Phoenix BIOS ROM
• APM 1.2, DMI 2.1, PCI 2.2, ACPI 1.0, Plug and Play (PnP), SMBIOS 2.3
PC Health Monitoring
• Onboard voltage monitors for CPU cores, chipset voltage, 3.3V, +5V,
+12V, -12V and 3.3V standby
• Fan status monitor by Thermal Management via BIOS
• CPU/chassis temperature monitors
• Environmental temperature monitor via Supero Doctor III
• CPU fan auto-off in sleep mode
• CPU slow-down on temperature overheat
• CPU thermal trip support for processor protection, +5V standby alert
®
604-pin 64-bit/32-bit Nocona
1-6
TM
processors at 800
(*Notes: CPU FSB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X6da8-g2X6dae-gX6dae-g2

Table of Contents