Quick Reference - Supermicro X6DA8-G User Manual

Jumper Description
JP13 3rd PWR Supply Failure Enable
JPA1 SCSI Controller Enabled(X6DA8-G/G2)Pins 1-2 (Enabled)
JPA2/JPA3 SCSI Ch. A/B Term.Ena.(X6DA8-G/G2)Open(Enabled)
JPC1 Audio Enable/Disable
JPF Force Power
JPL1 Giga-bit LAN Enable/Disable
JWD Watch Dog Enable
XJ4F1/XJ4F2 PLL Select (*X6DA8-G/X6DAE-G)
Connector
ATX PWR (J1B4)
12V PWR (J1D1, J32)
COM1 (J6)/COM2 (J39) COM1/COM2 Serial Port Connectors
FAN #1-#8
DIMM#1A-#4B
GLAN1
GLAN2
IDE1(J3), IDE2(J4)
J9
J20
J22
J23
J24
JA1, JA2
JBT1
JD1
JF1
JK1
JL1
JOH1
JP8
JP12
JP14
PCIX#1,#2,#3(J12-J14) PCIX-100MHz ZCR,PCIX-100MHz/PCIX-133MHzslots
PCI#5(J19)
PCI-Express#4,#6
SATA0/1
JWOL
JWOR1
USB#0-3(J40)
USB#4-5,6-7(JD3, JD2) (Front Panel) Universal Serial Bus Headers

Quick Reference

Description
Primary 24-pin ATX PWR Connector
12V 8-pin PWR/12V 4-pin CPU PWR Connectors
CPU Fan1/CPU Fan2/Chassis Fans Headers
Memory (RAM) Slots#(1A,1B, 2A,2B, 3A,3B,4A,4B)
G-bit Ethernet Ports
G-bit Ethernet Ports (*X6DA8-G2/DAE-G2 only)
IDE1/2 Hard Disk Drive Connectors
Keyboard/Mouse
IPMI 2.0 Connector
System Management Bus Connector
Parallel (Printer) Port
PWR System Management Bus
Ultra 320 SCSI Channel A,Channel B(X6DA8-G/G2)
CMOS Clear (JBT1 is a pad:See Chapter 2)
PWR LED (Pins1-3), Speaker (Pins 4-7)
Front Panel Control
Keylock
Chassis Intrusion Header
Overheat LED
Floppy Disk Drive Connector
Power Fault Connector
PWR Fail Alarm Reset
PCI-33 MHz slot
x4/x16 PCI-Express slots
Serial ATA0/Serial ATA1 Headers
Wake-on-LAN Header
Wake-on-Ring Header
(Back Panel) Universal Serial Bus Ports
1-5
Chapter 1: Introduction
Default Setting
Open (Disabled)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Closed (333MHz)