Table of Contents
Advertisement
appliance. The indicator for the core
temperature sensor
3. Press the button
temperature.
You can set the temperature from 30 °C
to 99 °C. Refer to values in the table.
4. Set the oven function and the oven
temperature.
5. Press a button to stop the signal.
An acoustic signal sounds for two
minutes, when the meat is at the set core
temperature.
6. Deactivate the appliance.
7. Remove the plug of the core temperature
sensor from the socket. Remove the meat
from the appliance.
If the meat is not cooked to your satisfaction,
do the above steps again and set a higher
core temperature.
You can change the temperature at any time
during the cooking. Press
set core temperature.
WARNING!
Be careful when you remove the tip and
plug of the core temperature sensor. The
core temperature sensor is hot. There is
a risk of burns.
9.6 Inserting the oven accessories
Deep pan:
Push the deep pan between the guide bars of
the shelf support.
16
ENGLISH
flashes.
or
to set the core
to change the
Wire shelf:
Push the shelf between the guide bars of the
shelf support.
AirFry tray:
Place the AirFry tray on the third shelf
position. Place the baking tray on the first
shelf position.
• All accessories have small
indentations at the top of the right and
left side to increase safety. The
indentations are also anti-tip devices.
• The high rim around the shelf is a
device which prevents cookware from
slipping.
Advertisement
Table of Contents
