Mb LAN Enable/Disable
Change the setting of jumper JP3
to enable or disable the Mb LAN
port on the motherboard (see Fig-
ure 5-5 for location). Refer to the
table on the right for jumper set-
tings.
Gb LAN Enable/Disable
Change the setting of jumper JD3
to enable or disable the Gb LAN
port on the motherboard. (see Fig-
ure 5-5 for location). Refer to the
table on the right for jumper set-
tings.
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
See the table on the right for
jumper settings.
Power Supply Alarm
Enable/Disable
When enabled, the system will no-
tify you in the event of a power
supply failure.
See the table on
the right for jumper settings.
Chapter 5: Advanced Motherboard Setup
M b L A N
E n a b le /D is a b le
J u m p e r S e tting s
(J P 3 )
Jumper
P osition
P ins 1-2
P ins 2-3
G b L A N
E n a b le /D is a b le
J u m p e r S e tting s
(J D 3 )
Jumper
P osition
P ins 1-2
P ins 2-3
V G A E n a b le /D is a b le
J u m p e r S e tting s
Jumper
P osition
1-2
2-3
T h ird P o w e r S u p p ly
A la rm E n a b le /D is a b le
J u m p e r S e ttin g s (J P 9 )
Jumper
P osition
O pen
C losed
5-19
D efinition
E nabled
D isabled
D efinition
E nabled
D isabled
(J P 4 )
D efinition
E nabled
D isabled
D efinition
D isabled
E nabled