Auto Start - UNI-T UT3200+ Series User Manual

User's Manual
9.1.3 【Key Beep】
Setup steps
Press【Setup】quick key to enter < Setup> main page;

Use【Arrow】key to move cursor to【Key Beep】field，press【OK】and【Arrow】

key to select.
Functional Key
9.1.4 【AutoStart】
Setup steps
Press【Setup】quick key to enter <Function Setup> main page;

Use【Arrow】key to move cursor to【Auto-start】field，press【OK】key to select.

9.2 <Channel Setup>
<Channel Setup> is to set channel's name and the upper/lower limit of temperature. This
setting is related with the comparator and can refer to section 5.2.
9.3 <User-calibration>
<Guest Cal> is used to adjust abnormal temperature. Input the actual temperature value in
calibration column to complete the setting.
Instruments.uni-trend.com
℃
K
℉
ON
OFF
Functional Key
ON
OFF
degree Celsius
Kelvins
Fahrenheit scale
Description
Turn on key beep
Turn off key beep
Description
Turn on auto-start
Turn off auto-start
UT3200+ Series
31 / 40