ABB ACS880-x04 Firmware Manual page 214

214 Parameters
No. Name/Value
22.15 Speed additive 1
source
22.16 Speed share
-8.000 ...8.000
22.17 Speed additive 2
source
22.21 Constant speed
function
Bit Name
0 Constant speed
mode
1 Direction
enable
2...15 Reserved
0000b...0011b
Description
Defines a reference to be added to the speed reference after
reference selection (see page 582).
For the selections, see parameter
Note: For safety reasons, the additive is not applied when any
of the stop functions are active.
Defines a scaling factor for the selected speed reference
(speed reference 1 or 2, multiplied by the defined value).
Speed reference 1 or 2 is selected by parameter
ref1/2 selection.
Speed reference scaling factor.
Defines a reference to be added to the speed reference after
the speed share function (see page 582).
For the selections, see parameter
Note: For safety reasons, the additive is not applied when any
of the stop functions are active.
Determines how constant speeds are selected, and whether
the rotation direction signal is considered or not when
applying a constant speed.
Information
1 = Packed: 7 constant speeds are selectable using the three sources
defined by parameters 22.22,
0 = Separate: Constant speeds 1, 2 and 3 are separately activated by
the sources defined by parameters 22.22,
In case of conflict, the constant speed with the smaller number takes
priority.
1 = Start dir: To determine running direction for a constant speed, the
sign of the constant speed setting (parameters 22.26...22.32) is
multiplied by the direction signal (forward: +1, reverse: -1). This
effectively allows the drive to have 14 (7 forward, 7 reverse) constant
speeds if all values in
WARNING: If the direction signal is reverse and the active
constant speed is negative, the drive will run in the forward
direction.
0 = Accord Par: The running direction for the constant speed is
determined by the sign of the constant speed setting (parameters
22.26...22.32).
Constant speed configuration word.
22.11 Speed ref1
22.14 Speed
22.11 Speed ref1
22.23 and 22.24.
22.23
22.26...22.32 are positive.
Def/FbEq16
Zero
source.
1.000
1000 = 1
Zero
source.
0000b
and 22.24 respectively.
1 = 1