Table of Contents
Advertisement
6
SECURING OVEN TO CABINETRY
1
Position the oven in the prepared cavity.
Important!
Do not lift the oven by the door handle.
2
Open the oven door fully.
3
Use the supplied screws to secure the oven to the cabinetry.
Important!
Do not over-tighten the screws.
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult.
Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this removal.
7
FINAL CHECKLIST
Make sure the oven is level and securely fitted to the cabinetry and the oven
door opens and closes freely.
Make sure all the internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and are free of any
obstruction/damage.
Check the lower trim is still undamaged - open the oven door slowly to its fully
open position and check if there is adequate clearance between the bottom of
the door and the lower trim. This is to ensure correct air circulation. Should the
lower trim become damaged, straighten the trim and ensure the oven door
opens fully without obstruction.
Check that the power supply cable does not touch any metal parts that can
become hot during use.
2.5 mm
Make sure that the isolating switch is easily accessible by the customer.
Turn the power to the oven on. On some models, the display should light up
and show 0:00 .
Advise the customer to follow the instructions in their user guide in section
'First use' .
www.fi sherpaykel.com F&P Italy Part No. 1103268-ß8 599790H NZ AU GB IE 10.17
Advertisement
Table of Contents
