Table of Contents
Advertisement
When you install the oven
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult.
Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this removal.
Use the supplied screws to secure the oven to the cabinetry. Do not over-tighten the screws.
Make sure that the power supply cable will not touch any hot metal parts.
Make sure that the isolating switch will be easily accessible by the customer.
Do not stand on the door, or place heavy objects on it.
2
PRODUCT DIMENSIONS
Installation diagrams for illustration purposes only
C
E
B
A
H
G
Product dimensions
(mm)
A
overall height of product
(including upper and lower vents)
B
overall width of product
C
overall depth of product
(excludes handle and dials)
D
height of chassis at the rear
D
I
overall height of chassis
E
maximum width of chassis
F
depth of chassis
G
depth of oven frame and control panel
(excludes handle and dials)
H
depth of oven door
(open) (measured from front of door)
Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the
cooktop manufacturer's instructions.
D
I
D
16-20 mm
G
F
2.5 mm
478
895
564
464
468
853
544
20
418
Do not lift the oven by the door handle.
Take extra care not to damage the lower trim of the oven. We suggest you place the unpacked
oven onto wooden blocks or similiar supports.
When handling the oven, take care not to damage the door sensor lever
(near the top right corner of the oven seal).
Use easy-to-clean finishes for the wall surfaces surrounding the oven, so that cooking fume
staining resulting from using the oven is easy to remove.
CABINETRY DIMENSIONS
3
Cabinetry dimensions
(mm)
A
minimum inside depth of cavity
B
minimum inside width of cavity
I
B
overall width of cabinetry
C
height of cavity
B
I
B
A
C
Ensure the cavity is completely sealed with no gaps
550
860
900
480
Advertisement
Table of Contents
