Table of Contents
Advertisement
S
S
UPER
ERVER 6013P-T Manual
7-4
Advanced Setup
Choose Advanced from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. The items with a triangle beside
them have sub menus that can be accessed by highlighting the item and pressing
<Enter>. Options for PIR settings are displayed by highlighting the setting option
using the arrow keys and pressing <Enter>. All Advanced BIOS Setup options
are described in this section.
Main
Advanced
Quick Boot Mode
Quiet Boot
PCI/PnP Configuration
Cache Memory
I/O Device Configuration
Advanced Chipset Control
Advanced Processor Options
DMI Event Logging
Console Redirection
↑↓
F1 Help
Select Item
↔
Esc Exit
Select Menu
Quick Boot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine
after the computer is turned on. The settings are Enabled and Disabled. If
Disabled, the POST routine will run at normal speed.
Quiet Boot
This setting allows you to Enable or Disable the diagnostic screen during
boot-up.
Phoenix BIOS Setup Utility
Security
Power
[Enabled]
[Disabled]
-/+
Change Values
Enter Select Sub-Menu
7-6
Boot
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
