Ide Configuration - Supermicro SUPERSERVER 6013L-8 User Manual

S S
UPER ERVER 6013L-8 Manual
Serial Port 2 Mode
Use this option to choose the Serial Port 2 Mode. The settings are
Normal, Sharp-IR, SIR and consumer.
Parallel Port Address
This option specifies the I/O address used by the parallel port. The settings
for this item include Disabled, 378, 278 and 3BC. Select your setting and
then press "Enter".
Parallel Port IRQ
This option allows the user to set the Parallel Port IRQ. The settings
for this item include 5 and 7.
Parallel Port Mode
This option specifies the parallel port mode. The settings for this item
include Normal, Bi-directional, EPP and ECP.
ECP Mode DMA Channel
This option allows the user to set the setting for the ECP
Mode of the DMA Channel. The settings for this item include
0, 1 and 3.

IDE Configuration

Onboard PCI IDE Controller
This option allows the user to enable or disable the integrated IDE Control-
ler. The settings include Disabled, Primary, Second and Both. Select "Dis-
abled" to disable the Integrated IDE Controller. Select "Primary" to enable
the Primary IDE controller only. Select "Secondary" to enable the Second-
ary IDE Controller only. Select "Both" to enable both Primary and Secondary
IDE Controllers.
7-6