Electrical Connection; Positioning And Levelling - Whirlpool WS67E4KHX/MEA Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

WARNING : This operation must be perfomed

by a qualified technician

INSTALLATION

Before operating your new appliance please read

this instruction booklet carefully. It contains

important information concerning the safe installation

and operation of the appliance.

Please keep these operating instructions for future

reference. Make sure that the instructions are kept

with the appliance if it is sold, given away or moved.

The appliance must be installed by a qualified

professional according to the instructions provided.

Any necessary adjustment or maintenance must be

performed after the appliance has been

disconnected from the electricity supply.

Positioning and levelling

It is possible to install the appliance alongside

cupboards whose height does not exceed that of the

hob surface.

This cooker should be installed directly on

. Do not install this cooker on an

the floor

artificial base of any kind.

Make sure that the wall in contact with the back of

the appliance is made from a non-flammable, heat-

resistant material (T 90°C).

Important: Do not install this appliance

adjacent to the door or other means of

access to minimise the likelihood of persons

using the door making contact with pans on

the hob surface.

The appliance must not be installed behind

a decorative door in order to avoid overheating

This appliance must not be fitted on a platform.

The cooker is designed to fit between kitchen cabinets

spaced 600mm apart. The space either side need

only be sufficient to allow withdrawal of the cooker for

servicing. It can be used with cabinets one side or

both as well as in a corner setting. It can also be used

free-standing.

Adjacent side walls which project above hob level,

must not be nearer to the cooker than 150mm

and should be protected by heat resistant

material. Any overhanging surface or cooker hood

should not be nearer than 650mm.

a. The cooker may be located in a kitchen, a kitchen/

diner or bed sitting room, but not in a bathroom or

shower room.

b. The hoods must be installed according to the

requirements in the hood handbook.

c. The wall in contact with the back of the cooker must

be of flameproof material.

d. The cooker is fitted with a safety chain that must be

attached to a hook, secured to the wall behind the

appliance.

Electrical connection

Ovens with a three-pole power supply cable are

designed to operate with alternated current at the

supply frequency and voltage indicated on the data

plate (at the bottom of the oven dashboard). The

earthing conductor of the cable is the yellow-green

conductor.

Connecting the supply cable to the mains

WARNING : This operation must be perfomed

by a qualified technician

Before moving your cooker check that it is cool, and

switched off at the cooker control unit. Movement of

your cooker is most easily achieved by lifting the

front as follows:

Moving the Cooker

Open the grill door sufficiently to allow a comfortable

grip on the underside front edge of the oven roof,

avoiding any grill elements. (FIG.A)

Take care in moving the cooker as it is heavy.

Take care to ensure that any floor covering is not

damaged.

The following instructions should be read by a

qualified technician to ensure that the appliance is

installed, regulated and technically serviced

correctly in compliance with current regulations.

Fig. A

Table of Contents

Electrical Connection; Positioning And Levelling - Whirlpool WS67E4KHX/MEA Manual

Available languages

Positioning and levelling

Electrical connection

Related Manuals for Whirlpool WS67E4KHX/MEA

Related Content for Whirlpool WS67E4KHX/MEA

Table of Contents