Starting And Shutting Down The Projector - Vivitek DU4371Z-ST User Manual

Starting and Shutting down the Projector

1.
Securely connect the power cord and
signal cable. When connected, the power
led will flash green to solid green.
2.
Turn on the light source by pressing
" " button on the projector or "
on the remote control.
The PWR LED will now flash green.
The startup screen will display in
approximately 30 seconds. The first time
you use the projector, you can select
your preferred language from quick menu
after the startup screen display. (See
Setting the OSD Language
See Setting an Access Password
(Security Lock)
is enabled.
on page 21)
on page 15 if security lock
"
– 13 –
DLP Projector—User's Manual