Changing The Exposure And Original Image Type; Changing The Exposure And Original Image; Type - Sharp MX-2600N Quick Start Manual

CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate for the original.
The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained
below.
The side to be scanned must be face up!
Scan Internet Fax Fax USB Mem. Scan
Address Book
Original Scan: Auto
Address Entry
Exposure Auto
(1)
Send Settings Resolution 200X200dpi
File Format
Address Review PDF
File Color Mode Auto/Grayscale
Special Modes
Quick File
When Fax/I-Fax address is included,
exposure setting shared is selected,
and Original Image Type is disabled.
Scan/Exposure
Auto
Original Image Type
Manual
Text/
Text
Prtd.Photo
(3)
Printed
Photo
Photo
1 3 5
(4)
Moiré Reduction
1
2
PC Scan
8½x11 Send: Auto
PDF
Mono2
OK
(2)
OK
(5)
Text/Photo
Map
3
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Touch the [Exposure] key.
(2) Read the displayed message and touch the
[OK] key.
(3) Touch the [Text/Prtd. Photo] key.
(4) Darken light colors with the
5 levels are available for the exposure. Darken light
originals with the
with the key.
(5) Touch the [OK] key.
Select the destination and then press the
[COLOR START] key or the [BLACK & WHITE
START] key.
key.
key, and lighten dark originals
Cancel scanning
83