Brake Maintenance; Testing The Parking Brake - Toro 22323HD Operator's Manual

B. Open the front and top coolant-bleed valves
(Figure 51).
C. Pour coolant into the coolant-filler neck until
the coolant begins to come out of the front
coolant-bleed valve
D. Close the front coolant-bleed valve
51).
E. Pour coolant into the coolant-filler neck until
the coolant begins to come out of the top
coolant-bleed valve
F. Close the top coolant-bleed valve
51).
G. Pour coolant into the coolant-filler neck until
the coolant level comes into the filler neck
(Figure 51).
H. Install the coolant-fill cap
I. Add coolant into the expansion tank until
it reaches the Full mark on the side of the
tank (Figure
5. Install the expansion tank cap.
Changing the Engine Coolant
Service Interval: Yearly
Have an Authorized Service Dealer change the engine
coolant yearly.
If you need to add engine coolant, refer to
the Engine Coolant (page
(Figure 51).
(Figure 51).
(Figure
(Figure 51).
51).
Changing
39).

Brake Maintenance

Testing the Parking Brake

Service Interval: Before each use or daily
(Figure
1. Engage the parking-brake; refer to
Parking-Brake Lever (page
2. Start the engine.
3. Slowly attempt to drive the machine forward or
rearward.
Note:
brakes engage in the drive sprocket.
4. If the brakes do not hold the machine after the
initial slight movement, contact your Authorized
Service Dealer for service.
39
12).
The machine may roll slightly before the