Chapter1 Technical Parameters; Applicable Fiber Type; Splice Loss; Splice Mode - FIBER FOX MINI3S User Manual

Contents
7.10 Update Software
Chapter 8 Other Functions & Utilities
8.1 Data Storage
8.2 Display Splice Record
8.3 Delete Splice Record
8.4 Cancel Data Storage
8.5 System Setting
8.6 Auto rotate screen
8.7 Power Save Option
8.8 System Information
Appendix A
Appendix B
Appendix C
Battery precautions
04
34
35
35
35
35
35
36
37
38
39
41
44
46
Chapter 1 Technical Parameters

1.1 Applicable Fiber Type

SM(ITU-TG.652&G.657)/MM(ITU-TG.651)/DS(ITU-TG.653)/NZDS(ITU-TG.655)
/ITU-TG.657A/ITU-TG.657B
Fiber count: Single
Applicable fiber / cable diameter: 0.25mm/0.9mm/2.0mm/2.4mm/3.0mm/ Indoor
Cable
Applicable fiber diameter: Cladding diameter: 150μm / Coating diameter:100μm ~
3000μm

1.2 Splice Loss

Same fiber is spliced, measured by insertion method relevant to ITU-T standard.
The typical values of splice loss are:
SM:0.03dB
MM:0.02dB
DS:0.05dB
NZDS:0.05dB
G.657:0.03dB

1.3 Splice Mode

128 kinds of splice modes; 11 kinds of preset splice mode
Up to 10,000 redords and 2,000 splice image
Splice time: SM Quick Mode:7s.
1.4 Heat Oven
kinds of applicable protection sleeve
Heating time: 8 to 900s optional.
Typical heating time: 18s.
Heating mode: Factory Installed Mode: 5, User Installable Mode: 32
Heater: Specific heater for MINI3S fusion splicer.
05