Auto Rotate Screen; Power Save Option - FIBER FOX MINI3S User Manual

Parameter
Buzzer Sets the sound volume of the buzzer
Automatic If select "On", when the fiber is placed into heat oven, which will
heating automatically execute heating.
Language Sets a language to be displayed on the screen.
Auto Rotate When you press "ON" in the system setting menu, the screen can
Screen auto rotate the screen.
Power Save Sets the time of Monitor Shut Down, time of Splicer Shut Down
Option and LCD brightness.
Set Calendar Sets the system time.
Changes the password to access some menus as "Power on
Option" and "Menu Lock".
At the time of shipment from the factory, the password is set as
Password "0000".
If you have forgotten your password after you changed another
one,
contact the nearest sales agency.
If you select "ON", pull test will be performed after fusion splicing
Pull test
completion.
Dust check: check dust and contaminants in optical path to avoid
Dust check optical fiber inspection disturbance. If contaminants exist, press
confirm key to display the contaminants' position.
"On": passwords are needed to input for entering into the fusion
Password lock splicing window when power on. "OFF": No passwords are
needed when power on.
Display fusion splicer's basic information: Machine serial NO.,
System Software version, FPGA version, total Arc count, current Arc
information count, Last maintenance, Production date, Sales Region, Product
OEM.

8.6 Auto Rotate Screen

When you press "ON" in the system setting menu, the screen can auto rotate the
screen.
36
Description

8.7 Power Save Option

This function is important for power conservation. If the power saving function is
not set during battery pack use, the number of splice cycles will be reduced.
(1) Insert a power unit and turn on the splicer.
(2) Select "Power Save Option" in "System Setting" menu.
(3) Change values of "Monitor Shut Down" and "Splicer Shut Down".
Parameter
To avoid power loss when battery is used, setting this function turns off
the power supply to the LCD monitor if the splicer does not operate after
Monitor Shut Down
a certain period of time. When the power supply for monitor turns off, the
LED near the power key blinks. Press any key to turn on the LCD monitor.
Automatically turns off the power supply of the splicer if it performs no
operation for a certain period of time. The function serves to prevent the
Splicer Shut Down
battery capacity from running low if the splicer is left on for an extended
period of time.
LCD Brightness Adjust LED backlight brightness.
Description
37