Table of Contents
Advertisement
Quick Links
AB*A012GTEH
AB*A014GTEH
AB*A018GTEH
AB*A024GTEH
Refer to the rating label for the serial number,
manufactured year and month.
INSTALLATION MANUAL
INDOOR UNIT (Floor / Ceiling type)
For authorized service personnel only.
INSTALLATIONSANLEITUNG
INNENGERÄT (Boden / Decken-Typ)
Nur für autorisiertes Fachpersonal.
MANUEL D'INSTALLATION
UNITÉ INTÉRIEURE (type sol / plafonnier)
Pour le personnel agréé uniquement.
MANUAL DE INSTALACIÓN
UNIDAD INTERIOR (tipo suelo / techo)
Únicamente para personal de servicio autorizado.
MANUALE DI INSTALLAZIONE
UNITÀ INTERNA (tipo a pavimento / soffi tto)
A uso esclusivo del personale tecnico autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
ΕΣΩΤΕΡΙΚΗ ΜΟΝΑΔΑ (Τύπου Δαπέδου / Οροφής)
Μόνο για εξουσιοδοτημένο τεχνικό προσωπικό.
MANUAL DE INSTALAÇÃO
UNIDADE INTERIOR (Modelo de chão / tecto)
Apenas para técnicos autorizados.
РУКОВОДСТВО ПО УСТАНОВКЕ
ВНУТРЕННИЙ МОДУЛЬ (Напольного / Потолочного типа)
Только для авторизованного обслуживающего персонала.
MONTAJ KILAVUZU
Yalnızca yetkili servis personeli için.
PART No. 9367701155-02
İÇ ÜNİTE (Tavan / Yer tipi)
MADE IN THAILAND
[Original instructions]
Advertisement
Table of Contents
Related Manuals for AirStage AB A012GTEH Series
Summary of Contents for AirStage AB A012GTEH Series
- Page 1 INSTALLATION MANUAL INDOOR UNIT (Floor / Ceiling type) For authorized service personnel only. INSTALLATIONSANLEITUNG INNENGERÄT (Boden / Decken-Typ) Nur für autorisiertes Fachpersonal. MANUEL D’INSTALLATION UNITÉ INTÉRIEURE (type sol / plafonnier) Pour le personnel agréé uniquement. MANUAL DE INSTALACIÓN UNIDAD INTERIOR (tipo suelo / techo) Únicamente para personal de servicio autorizado.
-
Page 2: Table Of Contents
INSTALLATION MANUAL This mark indicates procedures which, if improperly performed, CAUTION might possibly result in personal harm to the user, or damage to PART No. 9367701155-02 property. VRF system indoor unit (Floor / Ceiling type) Read carefully all security information before use or install the air conditioner. Contents Do not attempt to install the air conditioner or a part of the air conditioner by yourself. -
Page 3: Accessories
2.3. Accessories Name and Shape Q’ty Application Drain hose For installing drain pipe WARNING VP25 (O.D.32, I.D.25) For installation purposes, be sure to use the parts supplied by the manufacturer or other prescribed parts. The use of non-prescribed parts can cause serious accidents Hose Band For installing drain hose such as the unit falling, water leakage, electric shock, or fi... -
Page 4: Installation Dimension
3.3.1. Preparing indoor unit installation CAUTION Open the intake grille and remove the 3 screws. Do not install the unit near a source of heat, steam, or fl ammable gas. Machine screw Tapping screw Install the unit where drainage does not cause any trouble. Install the indoor unit, power supply cable, transmission cable, and remote controller Tapping screw cable at least 1 m away from a television or radio receivers. -
Page 5: Pipe Installation
B-1. Drilling for piping Apply the indoor unit to the brackets. Select piping and drain directions. Rear (Install the drain hose in this direction.) Bracket Bolt Indoor unit Right Hole Now, securely tighten the hex bolts in both sides. 3.3.3. Barrier and RFM base removal and installation (1) Remove the barriers by removing the 4 fi... -
Page 6: Pipe Requirement
4.3.3. Pipe connection 4.2. Pipe requirement Connect the silencer pipe to the small (liquid) pipe. Centering the pipe against port on the indoor unit, turn the fl are nut with your hand. CAUTION Be sure that the small pipe is completely installed before connecting the large pipe. Refer to the Installation Manual of the outdoor unit for description of the length of connecting pipe or for difference of its elevation. -
Page 7: Installing Drain Hose
After checking for gas leaks, insulate by wrapping insulation around the 2 parts (Gas and Install the drain hose Liquid) of the indoor unit coupling, using the coupler heat insulation. Working procedure After installing the coupler heat insulation, wrap both ends with vinyl tape so that there is 1) Install the attached drain hose to the drain port of the body. -
Page 8: Electrical Wiring
B. Under ceiling type CAUTION Be sure to arrange the drain hose so that it is leveled lower than the drain hose connect- Earth (Ground) the unit. ing port of the indoor unit. Do not connect the earth (ground) cable to a gas pipe, water pipe, lightning rod, or a GOOD PROHIBITED telephone earth (ground) cable. -
Page 9: Wiring Method
B. For strand wiring 6.2. Wiring method (1) Use ring terminals with insulating sleeves as shown in the fi gure below to connect to the terminal block. Example (2) Securely clamp the ring terminals to the cables using an appropriate tool so that the Outdoor unit or RB unit *1 cables do not come loose. -
Page 10: Connection Of Wiring
6.4. Connection of wiring (1) Remove the electric component box. Y1,Y2: Remote controller cable X1, X2: Transmission cable Electric component box Electric component box Cable tie (Medium) (Accessories) Cable clamp Earth (ground) L, N: Power supply cable 6.5. Optional parts wiring 6.5.1. -
Page 11: External Input And External Output (Optional Parts)
● Dry contact terminal ([CNA02], [CNA04]) Cable tie (locally purchased) Cable tie (bind with other cables) When a power supply is unnecessary at the input device you want to connect, use the Dry (locally purchased) contact terminal ([CNA02], [CNA04]). P.C.B CNA02 Ch 1 Ch 2... -
Page 12: Field Setting
● When function setting is “Emergency stop” mode. ● When connecting with unit equipped with a power supply [In the case of “Edge” input] P.C.B Connector Input signal Command Connected OFF → ON Emergency stop device 1 Ch1 of CNA01 or CNA02 Connected ON →... -
Page 13: Custom Code Setting
(1) Indoor unit address Function Function Setting number Default Details Rotary switch (IU AD × 1) ......Factory setting “0” number Rotary switch (IU AD × 10) ....Factory setting “0” Adjust the horizontal swing airflow 00 Standard Horizontal direction. When connecting multiple indoor units to 1 refrigerant system, set the address at IU 01 Left half swing airflow AD SW as shown in the Table A. -
Page 14: Mount The Cover Plate And The Intake Grille
7.3.1. Button name and function 8. MOUNT THE COVER PLATE AND THE INTAKE GRILLE OPERATION indicator lamp (Green) TIMER indicator lamp (Orange) 8.1. Handling for the pipe take-off part FILTER indicator lamp (Red) MANUAL AUTO button When the pipe is pulled out in the direction shown in the fi gure below, cover the take-off part with material (putty or the like) that will block it off. -
Page 15: Mount The Intake Grille
8.4. Mount the intake grille 11. ERROR CODES (1) Cut the right side of the If you use a wired type remote controller, error codes will appear on the remote controller intake grille. This is only display. If you use a wireless remote controller, the lamp on the photodetector unit will when the pipe exits from output error codes by way of blinking patterns.