Lincoln Electric POWERTEC i253C STANDARD Operator's Manual page 24

User setup
To access the User Setup:

Press the button [45] or right knob [44] to get access
of Welding Parameters Bar.

Use the right knob [44] to highlight the icon "User
setup".

Press the right knob [44] to confirm the selection.
Figure 16
The User Setup Menu enables to add the additional
function and / or parameters to the Welding Parameters
Bar [52] as shown in Table 9.
Table 9. User Setup Menu
Symbol
Preflow Time
Postflow Time
Burnback Time
Spot Welding Settings
Run-in WFS
Start Procedure
Crater Procedure
A/B Procedure
Recall from the User Memory
Save to the User Memory
USB Memory
WARNING
To change the parameters or functions value, theirs icons
has to be added to the Welding Parameters Bar [52].
English
Description
To add parameter or function to the Welding Parameters
Bar [52]:

Access to the „User Setup" (see the Figure 16.)

Use the right knob [44] to highlight the parameter or
function icon which will be added to the Welding
Parameters Bar [52], for example Run-in WFS.

Press the right knob [44] to confirm the selection. Run-
in WFS icon will be dropped.

To remove the icon - press the right knob [44] once
again.

To exit from User Setup Menu – press the left button
[43].

Selected parameter or function were added to the
Welding Parameters Bar [52].
22
Figure 17
Figure 18
WARNING
Figure 19
English