Overlapped Cashier/Server Entry - Sharp ER-A520 Instruction Manual

OVERLAPPED CASHIER/SERVER
ENTRY
This function allows you to switch from one cashier/server to another interrupting the first cashier/server's entry.
The second cashier/server can make a sales entry, then the first cashier/server may continue.
Example
Cashier 1: Entry started
Cashier 2: Cashier/server change (1 to 2), interruption initiated
Cashier 2: Transaction finished (2)
Cashier 1: Cashier/server change (2 to 1), entry restart
• The overlapped cashier/server entry is not available while the tendering sale.
Note
• If any cashier/server is still making an entry (or has not finalized the transaction yet), the machine
does not run in any mode other than REG and MGR and X/Z reports can not be performed. The
error message "SERVER ERR." and the corresponding cashier/server code(s) are displayed at
this time.
1. Cashier/server 1 is assigned.
2. Cashier/server 2 is assigned.
3. Cashier/server 1 is assigned.
72
Key operation
‹
(1
1
100
3
360
3
‹
2
@
3
2
150
a
‹
1
1
100
3
360
a
Comments
The entry by cashier/server 1 is started.
)
The entry by cashier/server 2 is started.
(The entry by cashier/server 1 is interrupted.)
The transaction by cashier/server 2 is finalized.
The entry by cashier/server 1 is restarted.
The transaction by cashier/server 1 is finalized.