Plu/Upc Programming; Unit Price - Sharp ER-A520 Instruction Manual

Example
3

PLU/UPC programming

Your machine is equipped with 2000 standard PLU/UPC codes. Your machine allows you to perform the
following programming for each PLU/UPC.
• Please note that the price lookup/subdepartment/UPC key (
Note
• To review the UPC codes available to this register, please refer to the chapter 13 in "Universal
Product Code(UPC) or European Article Number(EAN)".
Ä
• in Procedures indicates that you scan a barcode.

Unit price

Procedure
l
5
Level no.
(1 to 5)
PLU code (max. 5 digits)
UPC code (6 to 13 digits)
* In case that price shift function is allowed, the register prompts to enter a unit price for the following level by
displaying "P2" thru "P6" on the display, and when a unit price of level 6 is entered, the register goes to the
status for programming the following PLU/UPC. When you press the
prices for a PLU/UPC code, prices for the remained levels are kept unchanged.
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming
the following PLU/UPC.
Example
84
Key operation
1000000100000317
PGM 1 PGM 2
To program any PLU/UPC
Ä
Direct PLU key
ä
PLU/
UPC
Key operation
P
1 PLU/ 1000
UPC
@ 1
Ç
Food stampstatus F:Eligible
To keep current setting
Unit price 1
(max. 6 digits)
* To program unit price 2 thru 6 (only when price shift function is allowed.)
To program for the following PLU/UPC
ı
Ç
(In case of single price entry)
Print
Group no.
IJKLMN
(None):Ineligible
P
for ER-A520) is shown as
Ç
ı
Ç
on the way of programming multiple
Print
Taxable1
Commission
group no.
HALO
PLU/
.
UPC
Unit price