Advertisement
Safety precautions
Safety precautions
CAUTION
To avoid the risk of human injur y or proper ty
damage, be sure to read and observe the following
safety precautions:
• Consult a professional technician for installing and
connecting the speaker. — Incorrect installation may
lead to traffic accidents or malfunctions.
• Avoid installation where the speaker in unstable. —
Make sure that the speaker is stationary and does not
rattle. Displacement of the speaker may cause injury.
• Do not modify the speaker. — Doing so may result in
smoke or fire.
• Keep the volume of sound at an optimum level. —
Not being able to hear sounds from your surroundings
can lead to traffic accidents.
• In case of abnormality, stop the use and disconnect
the speaker. — If operation is continued, smoke or fire
may result. Disconnect the speaker and ask servicing.
• Always wear protective eyewear during installation.
• To prevent short-circuit, keep all wiring away from
moving parts, sharp edges, cut metal, etc.
• When removing or installing the grille, be careful not
to brush the unit with the edge of the grille.
• Do not switch ON power until wiring is completed.
KENWOOD XM69R speakers will work best when
powered by an amplifier. They have an impedance
of 2 ohm and will cause damage if wired directly to
the built-in power of a non-2 ohm stable radio.
The speaker's magnets are POWERFUL! Credit
cards and electronics can be sensitive to magnets,
so please exercise caution in how you pack your
saddlebags. Metal objects packed into your bags
may end up stuck to the magnet, so please use
caution when opening the lids.
Contents
Section 1: Installation Instructions to KENWOOD CA-CUT14 for 2014-Current Bikes..........3
Section 2: Installation Instructions to KENWOOD CA-LID98 Lids for 1998-2013 Bikes.....3
Section 3: Installation Instructions for another brand of 6" x 9" lids.................................4
Warranty Info.................................................................................................................................5
2
FOR PROPER INSTALLATION AND USE
Please read the instructions carefully before using
this speaker:
• Be careful not to accidentally kick or apply any sort of
strong impact to the speaker.
• To prevent damaging the speaker, turn off the power
of the amplifier before connecting it to the speaker.
• Do not use the provided parts for other purposes
Otherwise malfunction or fire hazard could result.
NOTE
Observe the following cautions to prevent damage
to the speakers:
• You cannot input the same power as "peak power"
continually.
• When the volume is set too high, the sound may be
distorted or abnormal. Reduce the volume promptly in
case of such phenomena.
Advertisement
