Kenwood X802-5 Instruction Manual

Kenwood X802-5 Instruction Manual

Class d five channel power amplifier

Advertisement

Accessories / Accessoires / Accesorios
Self-tapping screws
Vis taraudeuses
Tornillo autorroscantes
Ø4×16 mm
Dimensions / Dimensions / Dimensiones
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from
your new power amplifier.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for
information or service on the product.
Model X802-5 / XM802-5 Serial number
US Residence Only
Register your Kenwood product at www.kenwood.com/usa
© 2021 JVCKENWOOD Corporation
X802-5
XM802-5
CLASS D FIVE CHANNEL POWER AMPLIFIER
INSTRUCTION MANUAL
AMPLIFICATEUR DE PUISSANCE 5 CANAUX CLASSE D
MODE D'EMPLOI
AMPLIFICADOR DE POTENCIA DE 5 CANALES CLASE D
MANUAL DE INSTRUCCIONES
4 ②
Register Online
Speaker level input cable
Câble d'entrée de niveau d'enceinte
Cable de entrada del nivel de altavoces
248 mm (9-3/4 )
B5A-3472-10 / 01 (KN / WN)
1

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood X802-5

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2: Safety Precautions

    • If you experience problems during installation, consult Speaker selection your KENWOOD dealer. • Using speakers with smaller input ratings than the • If the unit does not seem to be working right, consult amplifier’s output power would result in smoke gener-...
  • Page 3: Installation / Installation / Instalación

    Installation / Installation / Instalación Installation procedure ① Parts included Since there are large variety of settings and connections possible according to applications, Pièces comprises read the instruction manual well to select the Partes incluidas proper setting and connection. 1. Remove the ignition key and disconnect the negative ⊖...
  • Page 4 Connections / Raccordements / Conexiones WARNING Remove the ignition key and disconnect the negative ⊖  terminal of the battery to prevent short circuits. AVERTISSEMENT Retirer la clé de contact et débrancher la borne négative ⊖ de la batterie pour éviter les court-circuits. The product with this logo is conformed to Hi-Resolution Audio standard defined by ADVERTENCIA Retire la llave de encendido y desconecte el terminal negativo ⊖...
  • Page 7 JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC Uithoorn, PAÍSES BAJOS X802-5 only / X802-5 uniquement / X802-5 solamente Declaration of Conformity with regard to the Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091) Declaration of Conformity with regard to the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I.
  • Page 9: Troubleshooting Guide

    Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION No sound. • Input (or output) cables are disconnected. •...
  • Page 10: Specifications

    Specifications Low pass filter frequency (−24 dB / oct.) (SUB) Specifications subject to change without notice..............50 Hz–200 Hz (variable) Audio section High pass filter frequency (−12 dB / oct.) (A.ch / B.ch) Rated power output (+B = 14.4 V) ..............50 Hz–200 Hz (variable) Stereo (4 Ω) + SUB (4 Ω) Bass boost control (40 Hz) (SUB)....0 –...

This manual is also suitable for:

Xm802-5

Table of Contents