Removing The Wireless Lan Module - Clevo P955ER Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 8
Wireless LAN
1. Turn off the computer, turn it over, remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
a. Locate the WLAN.
4. The Wireless LAN module
b. Disconnect the cables
and remove the screw.
c. The WLAN module will a.
pop up.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 8b).
b.

5.Wireless LAN Module
• 1 Screw
2 - 12 Removing the Wireless LAN Module
(page 2 -
on the mainboard
1
& , and then remove the screw
2 3
(Figure 8c) will pop-up, and you can remove it from the computer.
5
c.
1
2
4
3
6).
(Figure 8a).
(Figure 8b)
4
5
5