Table of Contents
Advertisement
LED
Status
Solid Green
2.4 GHz
Off
and
5 GHz
radios
Solid Green
Device Indicators in AP Firmware 8.8.0 and Lower
LED
Status
Power
Off
Solid green
LAN1
Off
Solid amber
Flashing amber
LAN2 (PoE)
Off
Solid green
Fast flash green
Slow flash green
Flashing green
2.4 GHz
Solid green
Flashing green
5 GHz
Solid green
Flashing green
WatchGuard Technologies, Inc.
Description
Connected to the network at 10/100/1000 Mbps
8.8.2 and higher: No SSID enabled on the radio.
8.8.1: Wireless radio is inactive.
8.8.2 and higher: SSID enabled on radio or WIPS scanning in progress.
8.8.1: Wireless radio is active.
Description
Powered off
Powered on
No Ethernet link
Connected to LAN1 port at 10/100/1000 Mbps
Activity on LAN1 port
No Ethernet link
Connected to LAN2 (PoE) port at 10/100/1000 Mbps
Did not receive valid IP address from DHCP
Cannot connect to Wi-Fi Cloud or Gateway Wireless Controller.
Activity on LAN2 (PoE) port
Client connected to 2.4 GHz radio
Activity on 2.4 GHz radio
Client connected to 5 GHz radio
Activity on 5 GHz radio
WatchGuard AP125 Hardware Guide
7
Advertisement
Table of Contents
