Table of Contents
Advertisement
6.13 Input Control
o Navigate to the [Input control] [Local Keyboard
Control Lock] menu
o You will see below items:
o [Off]: All local keyboard buttons are enabled
o [On]: All local keyboard buttons are disabled
except for the power button
o [All]: All local keyboard buttons are disabled
including the power button
Note: Local keyboard buttons are the
buttons on the backside of the TV
o Navigate to the [Input control] [Remote Control]
menu
o You will see below items:
o [Lock]: The TV will not respond to any RC codes
sent to TV by putting Lock to [On], normally
this should always be [Off]
Note: Using the master RC you would
still be able to enter in the professional
menu and navigate in it
o [Watch TV RC Key Mapping]: You can map the
"Watch TV" button on the RC to different
sources (Channels, HDMI sources, USB Media
Browser, DirectShare Media Browser)
o Navigate to the [Input control] [Multi Remote
Control] menu
o This function allows that up to 14 televisions can
be installed in a room whereas each TV will react
to its own RC
o You will see a list of options ('Off', the 4 color keys
and all digits)
o The TV will only react on the RC that is
programmed linked to your selection
Note: The TV will still respond to the master RC
o Once the TV is set to some value other than [Off],
also the RC should be programmed to the same
selection to still work with the TV
o How to program the RC:
o Press and hold both the menu and the color
button or digit button on the RC for about five
seconds (You should not point the RC to the
receiver on the TV)
o To see the status of the remote control, while
pointing at the TV, press and hold the "Mute"
button for about five seconds until you get a
notification on screen
- 46 -
Advertisement
Table of Contents
