Table of Contents
Advertisement
5. Virgin installation wizard
Out of the box a new TV will be in virgin mode. This means that you will have to go through the virgin
installation wizard to apply the first settings of the TV.
You might need to wake up the TV from standby.
5.1 Instant Initial Cloning (IIC)
5.1.1
Virgin installation
When starting up the TV in virgin mode you will see the first screen indicating Instant Initial Cloning
(IIC). The TV is now searching on USB, Network and RF for a new clone file containing all new settings
for the TV and/or a new software update.
You can also see the model name and SW version of the TV.
If there is no need to load a clone file in this TV (for example if you want to make a new installation to
create a master clone file) then you need to press "OK" to activate the skip button.
5.1.2
Instant initial cloning and software upgrade
If you want to upgrade the TV software and load a new clone file in the TV via USB you have to do
following steps:
Disconnect the TV from the mains power
Insert a USB device with both the new SW (See chapter "Software upgrade") and the clone file
you want to load in the TV
You must see following 2 files in the root of your USB device (remove all other files and folders)
Note: Both folder name and the upg file are case sensitive.
- 18 -
Advertisement
Table of Contents
