Table of Contents
Advertisement
o [Advanced reinstall] is what you need to
go through the complete wizard. This is
also the default wizard you should get the
first time.
First you will need to make a country
selection
o In the next screen you need to select the
Cable operator
Note: This list is country dependent
o In the next screen you can [Start] or
change the installation [Settings], these
settings are also available
professional menu. If you have changed
the setting you can return back using the
color keys as indicated on the screen
Note: By default [Quick Scan] is used, you
need to change the setting if you want to
do a full scan
o Next, you need to set the Network
Frequency and the Network ID. If you
[Skip] the installation will just start the
channel installation
Note: The default values (if these screens
are shown) are depending on the selected
operator
- 70 -
in the
Advertisement
Table of Contents
