Table of Contents
Advertisement
o [LCN]: You can put channel sorting
based on Logical Channel Number [Off]
or [On]
o [Install Scrambled Channels]: You can
disable
channel via [No] or enable it via [Yes]
o [Automatic Channel Update]: You can
put automatic channel update [Off] or
[On]
o [Channel Update Message]: You can
get a message when channels are
updated, you can put this option [Off]
or [On]
o Navigate to the [RF Channel Installation]
menu
o You will see below items:
o [Search for Channels]: See chapter
'Channel installation wizard' for more
details about installing the channels
o [Digital: Manual Installation]: This
can be used to manually search for
digital
frequency. When opening this menu
you can choose between [DVB-T
Search] or [DVB-C Search]. If you
open one of above menu items you
can give in a frequency to tune to
o [Analogue: Manual Installation]: This
can be used to manually search for
analogue channels. You can set the
[System]
Channels] where you can set the
frequency you want to search. Once a
channel is found you can [Store
Current Channel] or [Store as New
Channel]
- 37 -
installation
of
scrambled
channels
on
a
specific
you
need,
[Search
Advertisement
Table of Contents
