Table of Contents
Advertisement
o [Standby Mode]: The TV will quickly
turn on (higher power consumption in
stand-by) when [Fast] is selected, TV
will consume less power (but will have
a slower startup time) when selecting
[Green]
Note: For RF installations, the
client needs to choose to use
Green or Fast mode, this will
have
impact
consumption,
installations it must be set to Fast
o [Reboot Everyday]: You can select to
reboot the TV once a day if set to [On]
and your [Standby Mode] is set to
[Fast], you should not put it to [Off]
unless you build in your own reboot
using custom dashboard.
Note: a guest in the room will
never see this reboot. The
internal reboot will happen at
1AM in order to avoid hang-ups after
longer period. Hence you should never
turn this off
o [Auto Standby]: If any value bigger
than [0] is set, the TV will go to STBY by
itself after 10 minutes if no video signal
is there. If there is video signal, the TV
will go to STBY if no user interaction is
there for the time set using the slider
between [30] and [240] minutes. You
can also put this [0] to disable the TV to
go to STBY.
o [LED Power indicator]: If [On], the
power LED will be red while the TV is in
standby. When [Off], there will be no
power LED indication.
o Navigate to the [Security] menu
o You will see below items:
o [Lock Professional Menu]: When [On]
you can set a 5 digits PIN code to lock
the professional menu, when entering
the professional menu using the key
sequence you will need to enter the 5
digits, when [Off], this is disabled
o [High Security]: When [On], the
professional setup menu can only be
accessed by the Master RC and not
using the key sequence via a Guest RC,
when [Off] you can use both
- 48 -
on
the
power
for
IP
connected
Advertisement
Table of Contents
