Table of Contents
Advertisement
Status messages
LCD messages
Printer Memory Full
settings to reduce the
quality of the print job.
Printer Memory Full
(Recoverable)
Scanner Error:
Unplug and replug the
and Unplug and replug
power cable.
Memory Error:
Unplug and replug the
power cable.
<Alignment in progress...>
Alignment in progress
Wi-Fi Module Error
Wi-Fi Module Error:
Unplug and replug the
power cable.
NFC Module Error:
Unplug and replug the
power cable.
Weekly Maintenance
Weekly Maintenance:
Please wait until the job
is complete.
Serious Error
www.kodakverite.com/s
upport.
English
LED behaviors
Memory Full
Print failure.
blinks as pattern 1
Adjust the print
Skip
Memory Full
Print failure.
blinks as pattern 1
You can print
only one copy.
Skip
Continue
Scanner Error
Please check
Scanner Unit
and
the power cable.
blink as pattern 1
Memory Error
Unplug and replug
the power cable.
and
blink as pattern 1
blinks as pattern 6
Unplug and replug
the power cable.
and
blink as pattern 1
NFC Module Error
Unplug and replug
the power cable.
and
blink as pattern 1
Please wait
until the job is
complete.
Serious Error
Please refer to
Unit status or possible causes
Memory of the unit is full.
– You cannot print with this print setting.
– Please change the print setting, and try again.
(Resolution, size or number of copies)
Memory of the unit is full.
– You cannot print the multiple copies with this
print setting.
– Please change the print setting, and try again.
(Resolution, Size or Number of copies)
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
plug back into the socket.
• If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
the latest troubleshooting.
• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
plug back into the socket.
• If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
the latest troubleshooting.
• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
Please confirm the Menu display on the device.
– Print jobs cannot start while running alignment.
Run the alignment or run cancel operation on
the device.
Pull out the AC plug.
– Wait at least 30 seconds, then connect the AC
plug back into the socket.
• If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
the latest troubleshooting.
• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
This printer is in the process of Weekly
Maintenance.
– This printer will automatically exit Weekly
Maintenance mode upon completion of
maintenance.
– If this printer receives a print job during Weekly
Maintenance, the print job will be processed
after maintenance completes.
Software Update failed.
– If this error has occurred, visit our website at
www.kodakverite.com/support
troubleshooting.
70
Refer to
"Confirming Printing
Preferences for Windows®
-Page Layouts" on page
30
or "Confirming Print
Settings for Mac -Layout"
on page 32.
"Confirming Printing
Preferences for Windows®
-Print Quality" on page 30
or "Confirming Print
Settings for Mac -Quality &
Media"
on page 33.
"Power cycling"
for
on page 59.
"Power cycling"
for
on page 59.
for
"Power cycling"
on page 59.
for the latest
"Software Update" on page
52 .
Continued on next page.
Advertisement
Table of Contents
