Table of Contents
Advertisement
Status messages
LCD messages
Paper Size Error
Paper size mismatch.
Paper Size is short.
Paper size mismatch.
Paper Setting Mismatch
Paper Setting Mismatch
Paper Size
Paper Type
Check cartridge lock
Paper Jam:
Unplug and replug the
power cable.
and Unplug and replug
Cartridge/Paper Jam
Cartridge/Paper Jam:
Unplug and replug the
power cable.
Printer's ink door is
open.
English
LED behaviors
Paper Size Error
Print job has been
blinks as pattern 1
canceled.
Short paper
Print job has been
blinks as pattern 1
canceled.
Press
to print
blinks as pattern 1
with print setting.
4x6 in.
Glossy
Cancel
Print
Cartridge Error
Please check
blinks as pattern 1
ink cartridge lock.
Press
to retry.
Paper Jam
Paper Jam or
feed Roller Stall.
Clear Jam
and
the power cable.
blink as pattern 1
Please clear
the paper jam.
Unplug and replug
and
the power cable.
blink as pattern 1
Ink Door Open
blinks as pattern 1
Please close
ink door.
Unit status or possible causes
An unsupported size of paper for two-sided
printing is inserted.
– Insert supported size of paper (Letter or A4).
Attempted to print on paper which is shorter in
length than set in the Paper Settings.
The Paper Size/Paper Type setting for this print
job does not match that of the Print Settings.
– Check the Print Settings.
• To continue printing, press
• It is configurable whether or not to display
this message.
An ink cartridge is not installed correctly.
– If the packaging paper is stuck in the Ink door,
remove it.
– Reinstall the cartridge, then close the lid completely.
• Confirm the ink cartridge is correctly installed,
then press
.
A paper jam has occurred inside of the unit.
– Firmly grasp both sides of the paper, and then
gently pull it out. Pull out the AC plug. Wait
at least 30 seconds, then connect the AC plug
back into the AC socket.
• If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
the latest troubleshooting.
• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
An ink cartridge is not installed correctly.
– Pull out the AC plug.
Check that the Ink Cartridges have no obstacles
and clear pathways.
Connect the AC plug to the AC outlet.
A paper jam has occurred inside of the unit.
– Firmly grasp both sides of the paper, and then
gently pull it out. Pull out the AC plug. Wait
at least 30 seconds, then connect the AC plug
back into the AC socket.
• If this error occurs occasionally, visit our
website at
www.kodakverite.com/support
the latest troubleshooting.
• If you cannot solve the problem, disconnect
the AC plug and contact an Authorized
Service Center.
Ink Door Open
– Close Ink Door.
66
Refer to
"Specifications for print
media" on page 26 .
"Paper Setup" on page
44 .
.
"Paper Setting Mismatch"
on page 49 .
"Unpack" on page 11.
"Install ink cartridges" on
page 12.
"Changing the ink cartridge"
on page 57.
"Clearing paper jam in
the unit"
on page 59.
"Power cycling"
for
on page 59.
"Clearing paper jam in
the unit"
on page 59.
"Power cycling"
on page 59.
for
Continued on next page.
Advertisement
Table of Contents
