Playing Karaoke - Sharp CD-BK110V Operation Manual

Playing karaoke

You can enjoy karaoke to video CDs, CDs and cassettes by connecting a separately
available microphone to this unit.
1
Set the MIC LEVEL control to MIN to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
" Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
" Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")
diameter plug.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the CD/VIDEO CD or TAPE (1
source and play it.
If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages
29 - 30 for details.)
5
Adjust the volume of the audio source using the VOLUME buttons.
6
Turn the MIC LEVEL control towards MAX to increase the micro-
phone volume and towards MIN to decrease it.
Notes:
" When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone vol-
ume.
" If an extremely sensitive microphone is used, howling may be generated.
" Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
" Reduce the microphone volume.
" Change the direction of the microphone.
" Reduce the volume of the main unit.
" Move the microphone away from the speakers.
Caution:
" When not using the microphone, remove it from the MIC socket.
" When connecting or disconnecting the microphone, set the MIC LEVEL control to
MIN.
01/7/13 CD-BK110V(X)E3.fm
CD-BK110V
2) button to select the audio
ENGLISH E-28