Playing A Minidisc - Sharp MD-SR70H Operation Manual

PLAYING A MINIDISC

Earphones
For the For the
left right
(L) (R)
Remote control unit
1
Insert the earphones plug firmly into the
earphones socket on the remote con-
trol unit.
2
Plug the remote control unit into the
socket on the main unit. Push the plug
all the way in.
Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3
Insert a MiniDisc. (See page 9.)
The power will be turned on automati-
cally, and playback will start from the
first track. (Auto-play function)
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
After playback of the last track has fin-
ished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
Press the 06 button.
In the following cases, the auto-play func-
tion will not work.
When the recordable MiniDisc write
To the
socket
protection tab is closed (page 8).
When the auto-play function has been
cancelled (page 32).
4
Press the VOL + button to increase the
volume and the VOL – button to decrease
the volume.
Volume (0 - 30)
5
Adjust the bass level.
Each time the BASS button is pressed,
the tone will be switched as follows:
BASS 1
BASS 2
BASS 3
BASS OFF
When recording, it is impossible to ad-
just the bass level (bass emphasis is
cancelled).
The most recent volume or bass set-
tings are saved when the power is
turned off.
E-20
Bass sounds are emphasised
slightly.
Bass sounds are emphasised
more.
Bass sounds are emphasised
even more.
Bass emphasis is cancelled.
Continued to the next page.