Table of Contents
Advertisement
PLAYING A MINIDISC
REMOTE
To the
socket
1
Insert the earphones plug firmly into the
earphones socket on the remote con-
trol unit.
2
Plug the remote control unit into the
socket on the main unit. Push the plug
all the way in.
Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3
Insert a MiniDisc. (See page 9.)
The power will be turned on automati-
cally, and playback will start from the
first track. (Auto-play function)
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
After playback of the last track has fin-
ished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
Press the 06 button.
In the following cases, the auto-play func-
tion will not work.
When the recordable MiniDisc write
protection tab is closed (page 8)
When the auto-play function has been
cancelled (page 34)
Earphones
For the For the
left (L)
right (R)
Remote
control unit
VOL
4
Press the VOL + button to increase the
volume and the VOL – button to decrease
the volume (Remote control: move the
shuttle switch to VOL + or VOL – ).
Volume (0 - 30)
5
Adjust the bass level.
When the BASS button is pressed once,
the current setting will be displayed.
Each time the BASS button is pressed
(Remote control: the shuttle switch is
moved to BASS), the tone will be
switched as follows:
BASS 1
BASS 2
BASS 3
BASS OFF
When recording, it is impossible to ad-
just the bass level (Bass emphasis is
cancelled).
The most recent volume or bass set-
tings are saved when the power is
turned off.
E-20
VOL
Bass sounds are emphasised
slightly.
Bass sounds are emphasised
more.
Bass sounds are emphasised
even more.
Bass emphasis is cancelled.
BASS
:
OFF
Advertisement
Table of Contents
