Playing A Minidisc - Sharp MD-MS722H Operation Manual

PLAYING A MINIDISC

Earphones
For the For the
left (L)
right (R)
To the
Remote
control unit
1
Insert the earphones plug firmly into the
earphones socket on the remote con-
trol unit.
2
Plug the remote control unit into the
socket on the main unit. Push the
plug all the way in.
Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3
Load a MiniDisc in the direction indi-
cated by the arrow on the MiniDisc,
with the label side facing up. (Insert the
MiniDisc firmly, until a click is heard.)
The power will be turned on automati-
cally, and playback will start from the
first track. (Auto-play function)
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
After playback of the last track has fin-
ished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
06
Press the button.
In the following cases, the auto-play func-
tion will not work.
socket
BASS
When the recordable MiniDisc write
protection tab is closed (page 10)
When the auto-play function has been
cancelled (page 37)
4
From the main unit:
Press the + button to increase the vol-
ume and the - button to decrease the
volume.
From the remote control unit:
Move the shuttle switch up once to in-
crease the volume, and move it down
once to decrease the volume.
Volume (0 - 30)
5
Adjust the bass level.
Each time the BASS button is pressed,
the tone will be switched as follows:
BASS 1 Bass sounds are emphasised slightly.
Bass sounds are emphasised more.
BASS 2
BASS 3 Bass sounds are emphasised even more.
BASS OFF Bass emphasis is cancelled.
When recording, it is impossible to ad-
just the bass level (Bass emphasis is
cancelled).
The most recent volume or bass set-
tings are saved when the power is
turned off.
22
VOL
BASS
MD-MS722H(SUK)