CD-BK110V CD-BK110V CP-BK110 CD-BK110V Video CD Mini System consisting of CD-BK110V (main unit) and CP- BK110 (speaker system). VIDEO CD MINI SYSTEM MODEL CD-BK110V OPERATION MANUAL NTSC/PAL ENGLISH Please refer to pages E-1 to E-34. CD-BK110V(FRONT) 01.9.10, 15:15...
ENGLISH CD-BK110V Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Contents Page Page „ Important Instruction „ CD Playback Accessories .
Accessories CD-BK110V Please confirm that the following accessories are included. Remote control 1 "AA" size battery (UM/ AM loop aerial 1 FM aerial 1 Video cable 1 AC power lead 1 SUM-3, R6, HP-7 or similar) 2 Note: Only the above accessories are included.
System connections CD-BK110V „ Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be re- TV/monitor (See page 12.) ceived.
CD-BK110V „ Speaker connection „ Connecting the AC power lead Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter- After making all connections, connect the AC power lead to the unit minal.
Remote control System connections (continued) CD-BK110V „ Battery installation „ Setting the FM/AM span selector 1 Remove the battery cover. 2 Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery termi- nals.
General control CD-BK110V „ Extra bass (X-BASS)/Pre-programmed equaliser (Main unit operation) You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. Changing the mode: When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting will be displayed.
Setting the clock CD-BK110V Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. z Press the TUNING/TIME ( ) button once to advance the time by 1 hour. Hold it down to advance continuously.
Video CD Preparation for video CD play- CD-BK110V back Any CD that contains motion pictures can be played. You can enjoy motion pictures with the sound quality of MDs and the picture quality of VHS tapes. „ Connecting the TV/monitor...
Preparation for video CD playback (continued) CD-BK110V „ Selecting the video output format „ To change the audio mode Video CD is recorded in PAL or NTSC format. Sound of the playback source can be switched among the STEREO, L-CH, and R- Select the video output format (NTSC, PAL or PAL 60) according to your TV or VCR.
Playback of a video CD (CDs) with P. B. C. (Version 2.0) CD-BK110V Playback control: Turn on the TV and set the input selector to "VCR". Video CDs that support "Playback control" can display still pictures. This function can be used with video CD software (video CDs with playback control) that have a play- Press the ON/STAND-BY button to turn the power on.
Playback of a video CD (CDs) with P. B. C. (Version 2.0) (continued) CD-BK110V „ To move the menu screen (menu screen Select the desired menu number using the direct search buttons with more than 1 page) on the remote control.
Playback of a video CD (CDs) without P. B. C. (Version 1.1) CD-BK110V Place the video CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position.
Playback of a video CD (CDs) without P. B. C. (Version 1.1) (continued) CD-BK110V „ To skip to the beginning of a track (skip „ Direct search system search) By using the direct search buttons, the desired tracks can be played.
Programmed play CD-BK110V You can choose up to 32 selections for playback in the order you like. Press the direct search buttons on the remote control to select the de- sired track. Selected track number You can also select a track by pressing the PREV.) or...
Repeat or random play Time search selection CD-BK110V „ Repeat play You can play back from the desired scene by specifying the time. All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. Whilst in the stop or playback mode, hold down the DIGEST (DI- To repeat all tracks on up to 3 discs: GEST/TIME SEARCH) button to enter the time search mode.
Digest selection of discs and tracks CD-BK110V When there are more than 9 tracks on the video CD: Each press of the (NEXT ) button will display the next 9 tracks. Press the PREV.) button to return to the previous display.
Bookmark function CD-BK110V „ To recall a bookmarked scene This function marks the desired scene on the video CD to play it back easily. (Up to 9 scenes per disc can be marked.) Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second.
Resume play Changing the TV screen dis- CD-BK110V play This function is to restart playback from the point where it has stopped. During the stop mode, hold down the /SELECT/RESUME) You can check the operation of the main unit by the on-screen display.
Listening to a CD (CDs) CD-BK110V Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD (CD) button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up.
CD-BK110V To interrupt playback: „ To locate the beginning of a track Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. To move to the beginning of the next track: Press the button for less than 0.5 seconds during playback.
Listening to the radio CD-BK110V Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING/TIME ( ) button to tune in to the desired station.
Listening to the memorised station CD-BK110V „ Memorising a station „ To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a but- Press the PRESET ( or ) button for less than 0.5 seconds to select ton.
Listening to a cassette tape (TAPE 1 or TAPE 2) CD-BK110V Before playback: Playback is possible in TAPE 1 compartment as well as in TAPE 2. z For playback, use normal or low-noise tapes for the best sound. Press the ON/STAND-BY button to turn the power on.
Playing karaoke CD-BK110V You can enjoy karaoke to video CDs, CDs and cassettes by connecting a separately Set the MIC LEVEL control to MIN to protect the speakers from available microphone to this unit. shock noise and to avoid disturbing noises.
When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. „ Recording from a CD (CDs) z SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. You can record 3 CDs continuously.
CD-BK110V „ Recording from the radio „ Dubbing from tape to tape You can record from TAPE 1 to TAPE 2. Tune in to the desired station. (See page 25.) For recording, use only normal tapes. Do not use metal or CrO tapes.
Timer and sleep operation CD-BK110V „ Timer playback or timer recording Timer playback: The unit turns on and plays the desired source (video CD, CD, tuner, tape) at the pre- Before setting timer: set time. 1 Press the CLOCK button to check that the clock is on time.
CD-BK110V „ Sleep operation Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis- played. The illustrations show the timer playback setting.
Troubleshooting Maintenance CD-BK110V „ If trouble occurs „ Cleaning the tape-handling parts When this product is subjected to strong external interference (mechanical shock, z Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is these parts with a cotton swab moistened with commercial head/pinch roller operated incorrectly, it may malfunction.
Specifications CD-BK110V „ Tuner As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. Frequency range FM: 88 - 108 MHz There may be some deviations from these values in individual units.
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...