Boil Mode; Error Codes - TEFAL Everyday Slim IH210 Manual

BOIL Mode

• This mode will boil between 0.4 L and 2.5 L of water in a pot. (Do not use
this function for heating milk as it may burn).
• Below are the power levels that correspond to each program:
P1 P2 P3
300 W 600 W 1200 W
• The timer is available in Boil Mode:
Default time
10 min
BOOST Mode
• Boost raises the ring temperature very quickly. It can be used for cooking
food, such as meat, very quickly at a high temperature.
• Below are the power levels that correspond to each program:
P1 P2 P3
300 W 600 W 1200 W
• The timer is available in Boost Mode:
Default time
15 min
STIR FRY Mode
• Stir Fry Mode cooks food in a little fat at a high temperature so as to
brown the surface.
• Below are the power levels and oil temperatures that correspond to
each program:
P1 P2 P3
600 W 1200 W 1200 W
110 °C 125 °C 140 °C
• The timer is available in Stir Fry Mode:
Default time
15 min
14
P4 P5 P6
1400 W 1600 W 1800 W 2100 W
Maximum time
15 min
P4 P5 P6
1400 W 1600 W 1800 W 2100 W
Maximum time
120 min
P4 P5 P6
1400 W 1400 W 1800 W 2100 W
155 °C 170 °C 185 °C
Maximum time
180 min
FRY Mode
• This mode fries food in a large quantity of oil - maximum 2 L.
• Below are the power levels and oil temperatures that correspond to
each program:
P7
P1
1200 W 1200 W
100 °C 120 °C
• The timer is available in Fry Mode:
Default time
CLEANING
You must disconnect the power lead, wait until the ceramic glass plate
has cooled, then follow the instructions below to clean the appliance:
P7
1. Ceramic glass plate: if the ceramic glass plate is very dirty, clean
using a damp non-abrasive sponge or for more stubborn stains use an
appropriate cleaning product which is designed for use on ceramic hobs.
2. Cooker body and control panel: Use a damp soft cloth to clean. In case
of any oil stains that are not easily removed, wipe away the stains with
a soft cloth rinsed in warm water and a little washing-up liquid and then
clean using a damp soft cloth.
3. Air entry/air exit surface: remove any dust with a cotton bud.

ERROR CODES

• Receptacle missing or not the correct type:
P7
If the pot base diameter is less than 10 cm or if the pot material is
unsuitable, the buzzer will sound and the digital display shows "E1".
200 °C
Change the cookware.
• Protection of the power source against overheating:
If the power source overheats, the induction cooking appliance cuts
off the incoming power supply and the screen displays "E2". Allow the
hotplate to cool: if the defect persists, please contact the customer service.
P2 P3 P4 P5
1400 W 1400 W 1600 W
140 °C 160 °C 180 °C
15 min
EN
P6 P7
1800 W 2100 W
200 °C 220 °C
Maximum time
180 min
15