Page 2
AquaMaxx ConeS RC-3 In-Sump Protein Skimmer Footprint Recommended Water Level 8-10” 15.3” x 9.4” Height Pump Motor 23.8” Shark 3.0 Pump Power Consumption Chamber Diameter 8” 27 Watts Up to 450 Light Bioload Outlet Size 1 1/2” gallons Gallon Rating...
Page 3
Installation Guide Press- t the venturi into the pump. Connect the water outlet of the needlewheel pump to the skimmer body using the yellow silicone tube. Install the air silencer. Attach the air silencer to the skimmer body by nger-tightening the plastic thumbscrew in a clockwise motion.
Page 4
Installation Guide Connect the air silencer to the pump air intake using the yellow silicone air line tubing. Attach the drain elbow to the collection cup, using a zip tie to secure if desired. Questions? Email info@aquamaxxaquariums.com...
Page 5
Installation Guide Ensure the o-ring is securely in place on the skimmer body, then install the collection cup by twisting it clockwise onto the skimmer body. O-ring Questions? Email info@aquamaxxaquariums.com...
Page 6
Operation Guide The recommended water level range for this skimmer is 8-10 inches. For proper performance of the Quick-Precise adjustment valve, the water in your sump must not be any higher than 10”. Use the Quick-Precise adjustment valve to alter the water level within the skimmer body. Turning the valve counter- clockwise will open the outlet pipe, lowering the water level...
Page 7
Products requiring warranty service must be returned to AquaMaxx. You are responsible for the cost of shipping a warranty claim to AquaMaxx and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exhanged at our discretion and returned to you.
Need help?
Do you have a question about the ConeS RC-3 and is the answer not in the manual?
Questions and answers