AQUAMAXX FR-SE Installation Manual

GFO,Carbon and Biopellet Media Reactor
Installation Guide

Includes:

1/2" (13 mm) hose barbs *2
Main Body *1
Set of Filter Sponges
Hose Holder

Recommendations

1.
While we take great care to keep any contaminates away from our products during
assembly, please take a moment to clean the reactor and plumbing before attaching to
your tank. Only clean your reactor with warm water. Never clean Acrylic with alcohol based
products. Use caution when handling as acrylic scratches easily.
2.
Please keep in mind that a media reactor is intended to be a bypass filter, and is not
designed to handle the complete flow and pressure requirements of a large aquarium
system.
3.
Some media (such as phosphate control products) is not designed to be aggressively
fluidized in a reactor – please read the instructions of your media carefully.
4.
The reactor should be cleaned out every time that the media is replaced ensuring that there
is no media below the bottom plate.
FR-SE
*2

Filling Your Media

1
Loosen the thumb screws*4 to release the lid.
*1
2
( Only if you need to set the hosebarbs in different position )
The hose barbs could be set in different positions by unscrewing the
hose barbs fasteners beneath the lid, then pressing the hose barb
upward out of their hexagonal recess.
One and Only
Unique design of inlet and outlet could be set in multiple ways,
could be suitable for any tubing.
www.aquamaxxaquariums.com
info@aquamaxxaquariums.com
Multiple ways to set!
O-ring