Page 2
AquaMaxx cTech Nano Calcium Reactor User’s Manual Up to 75 gallons 3.2” Sicce Nano 0.8 L 14.2” 7.1” x 6” A - Water Outlet B - Reactor Water Inlet C - pH Probe Port D - Recirculation Pump & Housing...
Page 3
AquaMaxx cTech Nano Calcium Reactor User’s Manual Attach the bubble counter / pre lter assembly to the reactor lid by ngertwisting the white thumbscrew in a clockwise motion. Push-connect the ow control valve to the reactor’s water inlet. Push-connect the bubble counter to the reactor’s CO2 inlet.
Page 4
AquaMaxx cTech Nano Calcium Reactor User’s Manual Finger-twist the ve thumbscrews counter-clockwise to loosen and remove the reactor lid. Temporarily block the top of the central tube while lling the reactor with Calcium media. Do not over ll the reactor. Leave at least 1” of space between the media and the top of the reactor.
Page 5
AquaMaxx cTech Nano Calcium Reactor User’s Manual Cut a short length of CO2 tubing and connect it to the bottom of the CO2 bubble counter. Connect a CO2 check valve (sold separately) to the other end of the CO2 tubing.
Page 6
AquaMaxx cTech Nano Calcium Reactor User’s Manual Cut two suitable lengths of the included white tubing to form the water inlet and outlet lines. Connect the outlet tubing to the reactor water outlet. Connect the inlet tubing to the water pre lter inlet.
Page 7
AquaMaxx cTech Nano Calcium Reactor User’s Manual Open the ow control valve. Turn on the feed pump and the reactor pump. Let them run for 20-30 minutes, or until the water inside the chamber runs clear. Take this opportunity to check for leaks.
Page 8
Products requiring warranty service must be returned to AquaMaxx. You are responsible for the cost of shipping a warranty claim to AquaMaxx and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exhanged at our discretion and returned to you.
Need help?
Do you have a question about the cTech Nano Calcium Reactor and is the answer not in the manual?
Questions and answers