Epson EH-LS650B User Manual page 39

2. Connect the power cord to the projector's power inlet.
3. Plug the power cord into an electrical outlet.
The projector enters standby mode. This means the projector is receiving power, but has not yet
been turned on.
4. Press the power button on the projector or remote control to turn on the projector.
The Status light flashes blue as the projector warms up. When the projector is warmed up, the
Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. If you are using the remote control to turn the projector
on, make sure no one is looking into the lens or in front of the projector before turning it on.
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt, burn, or start a fire, and light that is reflected back into the lens
can cause the projector to malfunction. To stop projection, turn off the projector.
39