Table of Contents
Advertisement
AC MAGNETO AND STARTER CLUTCH
a
2
1
2
1
www.PlanDeGraissage.org
2. Install:
• Holder 1
• Bolt 2
CAUTION:
Pass the pickup coil lead and charging coil
lead under the holder while taking care not
to allow these leads to get caught with each
other. Also take care to pass the leads so
that they do not become loose at the bend
of the holder a in order to avoid their con-
tacting the starter clutch drive gear.
NOTE:
Apply the sealant to the grommet of the AC
magneto lead.
Quick gasket
YAMAHA Bond No. 1215:
3. Install:
• Idle gear 2 1
• Dowel pin 2
NOTE:
1
Apply the engine oil on the idle gear 2.
2
E
4. Install:
• Idle gear plate 1
• Bolt (idle gear plate) 2
2
4 - 83
ENG
7 Nm (0.7 m · kg, 5.1 ft · lb)
®
:
ACC-QUICK-GS-KT
90890-85505
10 Nm (1.0 m · kg, 7.2 ft · lb)
Advertisement
Table of Contents
