Yamaha WR250FR 2002 Owner's Service Manual page 184

OIL FILTER ELEMENT, WATER PUMP AND RIGHT
www.PlanDeGraissage.org
CRANKCASE COVER
2. Install:
• Right crankcase cover 1
• Bolt (right crankcase cover) 2
NOTE:
• Apply the engine oil on the impeller shaft
end.
• Mesh the impeller shaft gear 3 with primary
drive gear 4.
• Tighten the bolts in stage, using a crisscross
pattern.
Kickstarter crank
1. Install:
• Kickstarter crank 1
• Washer 2
• Bolt (kickstarter crank) 3
NOTE:
Install the kickstarter crank so that the kick-
starter crank is as vertical as possible with the
distance a between the kickstarter crank and
the frame being 8 mm (0.31 in) or more.
2. Install:
• Oil hose 1
• Bolt (oil hose) 2
3. Install:
• Copper washer 1
• Oil delivery pipe 2
• Union bolt (M8) 3
• Union bolt (M10) 4
4 - 62
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
33 Nm (3.3 m · kg, 24 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
New
18 Nm (1.8 m · kg, 13 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)