Yamaha WR250FR 2002 Owner's Service Manual page 198

KICK SHAFT AND SHIFT SHAFT
www.PlanDeGraissage.org
EC4B5111
Stopper lever
1. Install:
• Torsion spring 1
• Stopper lever 2
• Bolt (stopper lever) 3
NOTE:
Align the stopper lever roller with the slot on
segment.
Shift guide and shift lever assembly
1. Install:
• Spring 1
• Pawl pin 2
• Pawl 3
To shift lever 4.
NOTE:
Apply the engine oil on the spring, pawl pin
and pawl.
2. Install:
• Shift lever assembly 1
To shift guide 2.
3. Install:
• Shift lever assembly 1
• Shift guide 2
NOTE:
• The shift lever assembly is installed at the
same time as the shift guide.
• Apply the engine oil on the bolt (segment)
shaft.
4. Install:
• Bolt (shift guide) 1
4 - 76
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)