Table of Contents
Advertisement
Fuel Tank (CRF450RX)
9. Check for interference between the frame and
tank, and adjust the cushion rubbers (16) on
both sides of the frame if necessary.
(16)
(17)
(16) cushion rubbers
40
Servicing Your Honda
Installation
1. Install the fuel tank (1) on the frame.
2. Install and tighten the collar (2) and fuel tank
bolt (3) to the specified torque:
85.0 ± 2.5 mm
10 N·m (1.0 kgf·m, 7 lbf·ft)
(3.35 ± 0.10 in)
3. Hook the fuel tank band (4).
(4)
(1) fuel tank
(2) collar
4. Put the breather tube (5) in the steering stem
nut (6).
5. Remove the hose clamp (7) from the breather
tube.
(6)
(5) breather tube
(6) steering stem nut
6. Slide the shroud (8) toward the down so that
7. Install the shroud D bolt (12), shroud C bolt
(3)
(2)
The right and left shrouds can be installed in the
same manner.
(1)
(13)
(3) fuel tank bolt
(14)
(4) fuel tank band
(5)
(8) shroud
(9) tab
(10) slot
(11) air cleaner housing cover
8. Install the seat (page 38).
(7)
(7) hose clamp
the shroud tab (9) and the slot (10) on the air
cleaner housing cover (11) is aligned.
(13), shroud B bolt (14) and shroud A bolt (15).
Tighten the shroud A and B bolts to the
specified torque:
10 N·m (1.0 kgf·m, 7 lbf·ft)
Tighten the shroud C and D bolts to the
specified torque:
5.2 N·m (0.5 kgf·m, 3.8 lbf·ft)
(12)
(8)
(11)
(9)
(15)
(12) shroud D bolt
(13) shroud C bolt
(14) shroud B bolt
(15) shroud A bolt
(10)
Advertisement
Table of Contents
