Honda Selectable Torque Control; Current Mode; Mode Selection - Honda CRF450RX 2019 Owner's Manual & Competition Handbook

Honda Selectable Torque Control

The Honda selectable torque control reduces slip
and assists for an effective acceleration by
temporarily decreasing the engine torque during
rear wheel spin.
Torque Control level can be selected or turned on/
off, according to your skill and track conditions by
using the Torque Control button (1).
The Torque Control indicator (2) (green) comes on
while the system is operating.
Torque Control mode Rear wheel slip
1
2
3
OFF No operation
(1)
(1) Torque Control button
(2) Torque Control indicator (green)

Current Mode

Start the engine.
The Torque Control indicator indicates the
selected mode by blinking the mode number 3
times.
High
Middle
Low
(2)

Honda Selectable Torque Control

1. Start the engine.
2. Press the Torque Control button to select a
Torque Control mode 1:
The indicator short blinks
once and repeats it 3 times.
Torque Control mode 2:
The indicator short blinks 2
times and repeats it 3 times.
Torque Control mode 3:
The indicator short blinks 3
times and repeats it 3 times.
Torque Control off:
The indicator does not light
up.

Mode Selection

mode level. The mode changes every time you
press the button.
– The Torque Control indicator (green) will
indicate a selected mode by the number of
times the indicator blinks.
– The last mode selected will be saved.
– The factory setting is mode 2.
– Torque Control can be turned on and off by
press and hold the Torque Control button.
Torque Control mode 1
Torque Control mode 2 Torque Control off
Torque Control mode 3
: Pressing the Torque Control button
: Pressing and holding the Torque Control
button
Adjustments for Competition
143