Quick User Guide; Controls And Programmes - Hoover HBDO485TAMCE/1-S Manual

6. QUICK USER GUIDE

This washing machine automatically adjusts
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
Program selection
Turn on the washing machine and select

the required program.
Adjust the washing

necessary and press the required "option"
buttons.
DRYING
If you would like the drying cycle to
begin automatically after washing,
select the programme required using
the DRYING SELECTION button.
Or you can finish the wash and then
select the drying programme and
load size.
Press the START/PAUSE button to start

washing.
At the end of the programme, the

message "End" will appear on the display
or, on some models, all wash stage
indicator lights will turn on.
Wait until the DOOR LOCKED light has
gone out before opening the door.
Turn off the washing machine.

For any type of wash, see the program
table and follow the operating sequence
as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
7. CONTROLS AND
temperature if
A Programme selector with OFF
B START/PAUSE button
C DELAY START button
D DRYING SELECTION button
E RAPID / STAIN LEVEL button
F OPTIONS button
G TEMPERATURE SELECTION
H SPIN SPEED button
G+H KEY LOCK
I Digital display
L DOOR LOCKED indicator light
M ONE Fi EXTRA area
15
PROGRAMMES
position
button